Suchergebnisse

Solved!! Ha! I studied the faceplate where the little printed circuitboard sets in and found the problem! The faceplate has a molded flat area where the cb sits in snugly. I held a straightege to that face and saw it was bowed, straightedge touches on the ends, but had a 3.5mm gap in the...

Hi My Talea Ring Plus has an unresponsive coffee or enter(center) button. All the other touch areas work great except for this button. Software version is 02.00.08 man. date is 07/02007. This touch response slowly got less and less responsive over a period of several days(less than a week) till...

Thank you for the reply. I retested and find that brewing will shut off, but at a much greater volume than expected. At minimum setting I get about 3 ounzes and will fill a 6 oz cup when set at 9:00 oclock position (about 20 degree away from minimum) and will vary according to setting between...

Hi I recently purchased a Vienna deluxe, in working condition, but was told it had some issues, like a bad pump and grinder adjustment not working, which I fixed. After cleaning and assemblying everything, I find that the knob will not do anything to set cup size. I checked the voltage, as was...

Problem fixed. Hello all, I took off the water tank side cover by 1st removing the bean hopper, then removing the top screws, and also the all the screws in the water tank cavity. The side is removed by lifting it out of the tabs in rear, and pushing it down in front. You have to go slowly so...

Software Updates? Hallo Wo kann man diese updates erlangen? Ich mochte die tasse auf 600 vergrosern an mein Primea Ring wenn's moglich ist. Bitte las mir es wissen.

Cover removal for sensor repositioning. Thank you for the reply, Harry. I'm willing to dive in. Is it possible to remove only the half on the water tank side, or must everything be stripped down from the top? Has anyone documented how to take apart the Primea Ring? Let me know if there are...

Addenum to above reply Harry, the sensor works perfect in that it will go from "full" to "empty" in about 15mm height difference. I want to lower the sensor so it will shut off at a lower level. I do not want to take the machine apart if it cannot be moved. From my experience with the level...

Thank you Harry for the explanation of this sensor system. The sensor works flawlessly. Its only the triggering level that needs to be lowered so I can use the bottom 1/3rd of the water. Could the pickup sensor be repositioned lower or is it attached to some other part that is not moveable...

Hallo alle, Auf Deutch, so gut als ich mochte: (bin sehr krumm dabei :o) Der wasser beholter ist jetz nache bei 1/3 (oder mehr), voll doch begehrt die machine wasser. Ich habe es im diagnosemodus besucht zu beandern, doch sieht mann nur "700" mit wasser angefullt, "0" wenn wasser fehlt. Wo ich...

New CPU board solves problems Hi everyone, Just for follow-up: :) I installed the new CPU board and machine now works flawlessly :). I enjoyed using this forum, even though it's mostly written in a secondary language (to me) and I will continue to drop by on occasion. Thanks again mitim

THank you for the suggestion. I tried various key combinations, but nothing happens. Let me know if you find out how. I went ahead and ordered a new board from the dealer. That will work for sure. Thank you all for your suggestions, links,and information. It will be helpful when trying to...

Many thanks for your reply, Harry. The power supply card works with the CPU card from a working professional, so I think it should be OK. Does having the measured values within theorical values mean the circuitry is good, and nothing can be gained by replacing the capacitor? And btw, are all...

Here is a chart showing the readings in a somewhat better alignment.

Thank you very much for your time and effort you are applying to this. The resistors are as follows in the same arrangement: R16 = 272 R28 = 222 R11 = 152 Capacator Here is a voltage reading from black wire : (Almost) looks like the circuit is working. I do not know what voltage...

Hi Please see photos in my albums.

That could be, though the message box says jpg, zip, and some other files size limits are 8mb. Is there another way to transfer the pictures? Would email work?

Thank you Harry, I tried 3-4 times, but the larger jpg seem to be rejected at the last moment. (5,832kb) I tried uploading a *.zip pic, but same thing, after progress bar reaches the end and a 2 minute wait, mewwage that file transfer has failed. Have you any other suggestions? I think the i/o...

The jpg is not very clear. I will upload another

Here is a photo of the CPU card - Please note the red tracing lines indicating on which pin of CPU the problem input is connected. I will add more photos later - kinda tied up w/nieces' wedding, reg work, etc..