Elektronik help, saeco odea

[JUANJ666]

Saeco Odea
Hello, can you help me ? , I am Spanish.
I installed the new power board and does not work , shows the two lights (1 and 2) alternately flashing rapidly.
Light 1 : The alarm light to empty the dregs drawer .
Light 2 : The Light of decalcification.
Can I do?
With the old board began the process correctly but not ground the coffee but with the new card does not start the process.
Regard Juan

 

[Rudolfs.]

Hi Juan,
please excuse my bad english. I want to help you solve the problem with the machine. Why is changed the electronic plate? Have you try the test mode?

 

[JUANJ666]

saeco odea -

Hello, first thanks for your interest .

The first breakdown was the motor of the grinder, it produce a short circuit a small explosion, I changed the engine and then to the initial boot process by washing the circuit is well but not started grinding the coffee , I thought it could be due to the breakdown of some component of the plate feeding .I also changed the power board but now don't starts, only of the lights described above.
Sorry, I do not know how to do the test mode

My English is worse than yours English
Regard juan

 

[Rudolfs.]

Sorry, I do not know how to do the test mode

Hi juan,
the history of the machine is always interesting to know to make an effective repair instruction to a first opinion.

To get into test mode:
Press the water button, and hold switch on the device. Omit water button until the LED `s bedazzle left in a circle.

To the tests:

Knob amount of coffee and coffee left button - function valve (clack audibly)
Knob coffee quantity and water button on the left - the grinder is running (if turns Descaler LED flashes in time with the pulses from the Hall sensor).

Knob coffee quantity and water center button - brewing gear position (if the position Descaler LED begins to blink)
Knob amount of coffee and coffee center button - boiler switches on.

Knob to the right amount of coffee and coffee button - pump works (water flows, when steam valve open by steam pipe, when the coffee brewing position expiring in the BG, or in the drip tray when not open) thermometer sign flashes when flow meter sends impulses.
Knob to the right amount of coffee and water button - gear brew brewing position (when in position to catch the pomace LED flashing).

Here you can make some tests to see which parts work and which do not. The instructions are in the forum by Author Advokat, im only have translated this manual.

I have a Dog, a Dobermann, his name is "Amigo". And he is really my best friend

!

 

[JUANJ666]

If your best friend is Friend, then he is also my friend.

Hello.

I send you some pictures, one of which I have numbered the various buttons and lights to identify them correctly.
With the old card. Start on then pre cleaned only, then it is ready and green LED C on.
when I press "2" for initiation of coffee then nothing happens .
With the new card. When Start on then nothing happens only flashing of led’s “A and B”

My English is poor, can you repeat the test with the number identification of the picture?
Thanks you
Regard Juan
my email is: [email protected]

 

[Rudolfs.]

Hi Juan,

still i am waiting for an answer.
My friend Pedro was with me to visit, he is a little Spanish, so we sat down with the help of a "Langenscheid Wordbook" dictionary to the text of the test mode. Pedro live in Munich, 150 km south from me. We now hope that you can begin to translate something.
Before you begin using the test mode, you have to assemble the machine, pour water and close all doors.
The Spanish translation we sent you with personal messages so we do not have to embarrass us in front of everyone.

 

[JUANJ666]

m

Sorry, I had a visit and I can't reply.
Excuse me, I don't know how to say this.

Thanks, Thanks, very Thanks for your friend Pedro and you but I prefer you
tell me in English language.
Is very important that I know to identify the different buttons to make the
test.
Then I think it would be nice if when you refer to button them name me your
ID number on the photo I sent you.
Are you agree?
What is your name? Is Rudorf?

Regard Juan
Greetings my friend Friend

 

[JUANJ666]

saeco odea -

Sorry, I had a visit and I can't reply.
Excuse me, I don't know how to say this.

Thanks, Thanks, very Thanks for your friend Pedro and you but I prefer you
tell me in English language.
Is very important that I know to identify the different buttons to make the
test.
Then I think it would be nice if when you refer to button them name me your
ID number on the photo I sent you.
Are you agree?
What is your name? Is Rudorf?

Regard Juan
Greetings my friend Friend

 

[Rudolfs.]

Hi,
my Prename is Rudolf, short Rudi.
Now I want to try to help with naming of numbers on the photo.
switch number 1 is the water button
switch number 2 is the coffee button or the steam button, here i am not secure,*
switch number 3 is the steam button or the coffee button, here i am not secure,*
number 4 is the rotary knob coffee quantity.
your number 5 is the valve of steam/hot water.*
A,B,C and D are only LEDs for :
A = Waste Tank full,
B = Decalcification,
C = Temp. / Machine ready,
D = Alert.

* here i´am not sure, i have an Odea Cappuccino Ring without an Steamtube. The stearing is another.
Greetings Rudi

 

[Advocat]

Hi

Hi,
switch number 2 is the coffee button or the steam button, here i am not secure,*
switch number 3 is the steam button or the coffee button, here i am not secure,*

Number 2 = Coffee button

Number 3 = Ground coffee quantity button (Opti-dose)

Gruß Aydin

 

[Rudolfs.]

Hi
Number 2 = Coffee button
Number 3 = Ground coffee quantity button (Opti-dose)
Gruß Aydin

Thanks for the help is gladly accepted!
Danke, die Hilfe nehme ich gerne an!

 

[JUANJ666]

OK , THANK YOU.

Now I have found a broken chip, then I look get for change.
I'll tell you as happens.
I hope to get lucky
Regard Juan

 

[Rudolfs.]

Hi Juan,
the fact that you have found the broken chip is good. You must see why the chip is broken. Is it possible from the broken part of a photo to post me? In November or December, I am going to Portugal, because I want to visit you and drink a good coffee with you.
Where in Spain do you live?

 

[JUANJ666]

My saeco odea is OK

Hello my friend Rudi.
Can You have a coffee with me?
My Saeco Odea is ok.
Thank you
you are very nice
Thank you for your colaboration
Can I help you in anything?
I live in Cartagena city in provincia of murcia, and I believe it is far on portugal, but I would be happy that we could have a coffee together.
I repeat
Very very thank you.
Regard Juanjose