R
Robvha
Teetrinker
- Dabei seit
- 04.06.2012
- Beiträge
- 10
Um dir schneller bei deinen Problem zu helfen, bitten wir dich folgende Angaben zu machen:
- Mechanik- und Elektronikkenntnisse vorhanden --> yes
- Messgerät vorhanden --> yes
- Genaue Bezeichnung der Maschine --> yes
Hello,
Sorry for saying this in English. My German is horrible. I have this problem with my Saeco Odea Go:
The alarm light to empty the dregs drawer and the descaling light are flashing alternately. This happens when the coffee is grinded and the brew unit is trying to move to the right position. It gets stuck and the lights start flashing alternately. The grinded coffee goes in the waste bin and the brew unit is moving to the original position.
The fault message which I googled:
Maximum torque on the brew unit has been exceeded and the brewing cycle cannot continue.
I cleaned the brew unit several times. Replaced the rings. Cleaned the filter on the piston with soda. But all without luck.
Can someone tell me which part is causing this problem? I would be very grateful is someone can point me in the right direction.
Thanks!
Best regards,
Rob
- Mechanik- und Elektronikkenntnisse vorhanden --> yes
- Messgerät vorhanden --> yes
- Genaue Bezeichnung der Maschine --> yes
Hello,
Sorry for saying this in English. My German is horrible. I have this problem with my Saeco Odea Go:
The alarm light to empty the dregs drawer and the descaling light are flashing alternately. This happens when the coffee is grinded and the brew unit is trying to move to the right position. It gets stuck and the lights start flashing alternately. The grinded coffee goes in the waste bin and the brew unit is moving to the original position.
The fault message which I googled:
Maximum torque on the brew unit has been exceeded and the brewing cycle cannot continue.
I cleaned the brew unit several times. Replaced the rings. Cleaned the filter on the piston with soda. But all without luck.
Can someone tell me which part is causing this problem? I would be very grateful is someone can point me in the right direction.
Thanks!
Best regards,
Rob