Mechanik Mahlwerk settings !!!

[coralreef]

Hi all

I am having many doubts on where to set the mill/mahlwerk in my Royal cappuccino. There are these red and blue dots on the disks on top of the mill, but what are the standard and good settings for a good grind ?

 

[W1cht3lm@nn]

The most general setting is to turn the outer ring fully clockwise up to the point where its going stiff.
Then turn back 14 "clicks" and clip on the lever so that it points to the mid setting "4".

That should produce drinkable coffee. If it turns out that the setting range isn't optimal (e.g. only drinkable with lever at one end of the dial) then remove the lever again and reassemble it 3 clicks more in the desired direction.

 

[coralreef]

Hi !

Did it and it seam quite ok at that setting so thanks.