Program Data (PIC) verschiedene DeLonghi Maschinen - Diskussionsthread

[Ano]

One demonstration of faulty writting or reading was, that I can store quantity of watter to cofee button, if I hold it press, coffee machine grinding very short...

Please explain again, I don't understand (a language problem probably ;-) ).

Schematics of displaybord for EABI6600 didnt have?

No, but please post a picture of the board. And what do you mean by connecting extern cooler and light? Is the board defective, or...?

 

[JozefG]

Please explain again, I don't understand (a language problem probably ;-) ).

I mean, that if I want to store quantity of water for One cup of coffee to memory, in moment, when coffee machine was in process Quantitiy store, grinding tima was faulty. faulty means, that time will be lower than before storing. do you understand?

No, but please post a picture of the board. And what do you mean by connecting extern cooler and light? Is the board defective, or...?

No. I have esam 6600 ex3 displayboard, and i would like to Add components around this connector which are need for working cooling fan and light. So for this I want schematics

 

[Ano]

Ok, I understand it now
Right, you want to make the machine more fun then with lights etc.
I made some fun with the displays here: Display fun :-) - Kaffee-Welt.net - Das bohnenstarke Kaffeeforum

 

[JozefG]

No, I dont mean that.
I have broken displayboard for EABI 6600, and I want to change if with ESAM 6600 ex 3 displayboard.
But displayboard havent solder components around J3 or X6(on esam 6600 ex3) connectors

 

[Ano]

So they're different display pcb's, the EABI6600 and the ESAM6600EX3? When you don't post pictures, we'll never know... ;-)
Furthermore, there's a big chance that the program on the MCU of the display board is not compatible, in that case you need a suitable programmer. Or reprogram the MCU of the power board of course ;-)

 

[JozefG]

I know that without change program in display board will not work fan and Light.
Power board I think is the same.
power board with number 5213219800 work with eabi 6600 displayboard and esam 6600 displayboard too.

 

[Richard-53]

Can you upload a picture of the board 5213219800.
Procond Elektronica No. 35xxxxxx would also be of interest
The software as a hex would also be of interest.

 

[JozefG]

I make a mistake. Power board from EABI 6600 is the same with power board from esam 6600 without EX3. so power board 5213219800 is for eabi 6600 and esam 6600 too.
In ex3 model is power board as in esam 6700.
sorry

 

[OlliFFM]

Vielleicht findet sich jemand, der einen Dump von 5213213871 für die ESAM04.350 hat?

 

[Ano]

Hast du diese Maschine selber? Kannst du keinen Dump machen und hier posten? Danke.

 

[OlliFFM]

Ja, die Maschine steht hier aber der PIC / Speicher ist komplett leer. Alle anderen funktionieren nicht, da die Bedienplatine einmalig ist. Muss wohl neue Platine her

 

[Ano]

'komplett leer'? 100% sicher das PicKit setup ok ist?

 

[JozefG]

Next week i will have one, then i can download firmware if it will be helpfull for you

 

[JozefG]

'komplett leer'? 100% sicher das PicKit setup ok ist?

I have one which have Mcu KO. Someone connect 230V line to upper and lower position switch of brewing unit.... there was some resistors broken too.

 

[OlliFFM]

Ja, komplett leer. Ich hatte PicKit verbunden und musste raus, während meine Tochter an der Software rumgespielt hat... Jetzt ist die Software weg und die Maschine tot.

 

[HugoG]

️ ️ ️ Suche Dump für Delonghi ecam23.420 ️ ️ ️

 

[Ano]

Forensuche! Ist schon gepostet

 

[HugoG]

Forensuche! Ist schon gepostet

Danke, ich habe es gefunden !

 

[JozefG]

Hello. Dump for ESAM 04.350 5213215871
I forgot upload it earlier

[Korr. Grisu]falscher Dateiname wurde weiter unten korrigiert[Ende]

 

[Ano]

Die Dateinahme ist ...PIC4525...
Das muss wahrscheinlich ...PIC18LF4525... sein, richtig? Oder ...PIC18F4525...?

Hast du vielleicht ein Paar Bilder von der Platine? Danke!