Program Data (PIC) verschiedene DeLonghi Maschinen - Diskussionsthread

[anatolikoichev]

The original PIC have short circuit between Vdd and Vss. I replaced the processor with a new one. I have access to PIC with the programmer. Also i replaced another IC ULN2004, 74HC4052 and 7906

 

[anatolikoichev]

Hello everybody,

I am looking for HEX code to control board ECAM 23.210. Firmware for PIC16F916

 

[Michalada]

PIC16F916

 

[Ano]

PIC16F916

Is this also the 5513212491? Maybe you can post a picture? Thanks!

 

[Michalada]

Извините, кофемашины нет, поэтому я не могу сделать снимок.

 

[Ano]

Извините, кофемашины нет, поэтому я не могу сделать снимок.

But is it from the 5513212491? Or is it from another display unit that also fits the ECAM23.210?

 

[anatolikoichev]

Това е моята дъска 5513212491

 

[istais_krievs]

Hello coffee gurus. maybe you can help. I have a grandmother Delonghi ESAM 5500T with a broken power board. I replaced the burned elements and PIC controller. and now I'm looking for a Program Data.
5213214381
SW 1.0

 

[Richard-53]

Hier bitte

 

[istais_krievs]

Richard danke schön !!!

 

[arturro12]

Bardzo proszę o pomoc. Jakie są bity konfiguracyjne dla Delonghi 5500 z Pic18f452

 

[Ano]

What happened to German & English ;-)

 

[Grisu]

Hier werden aber NUR und ausschließlich De-Longhi Firmwares gepostet!
HD ist doch sicher eine Philips/Saeco ...

Bitte eröffnet einen eigenen Thread für Philips Firmwares!!!
Ich werde es hier irgendwann einmal löschen da unpassend.

 

[Georgts]

Wenn Sie der Meinung sind, dass es sich für 2 Modelle lohnt, einen neuen Thread zu öffnen, dann tun Sie es. Es sagt vielleicht philips drauf, aber es ist 99% delonghi außer der Firmware

 

[Ano]

HD5730 (De Longhi Sondermodell für Philips)

It's seems that this firmware / pcb is also used for the ESAM3600? Not only for the Philips HD5720/5730.

 

[Georgts]

It's seems that this firmware / pcb is also used for the ESAM3600? Not only for the Philips HD5720/5730.

i see that the 3600 sw is written on a PIC16F916 controller. the hd5730 is PIC18F452

 

[Georgts]

Please copy your last 2 postings to discussion forum!
I will delete reply #19 and #20 soon.
Here are ONLY firmwares - NO discussion to keep it clean!

really soon i will post the sw for aeg silenzio which is also 99% delonghi based but not the same. Also very rare to find

 

[vierpunktzwo]

Hab heute mal eine ETAM 36.366.MB durchgemessen. Konnte die Pins tatsächlich orten

 

[Ano]

Are you sure about connector ST1 pin1 being MCLR?
I used connector X12 for the MCLR (the pin that's closest to R61, it's pin 6?).
In that case, both can be used

 

[vierpunktzwo]

Are you sure about connector ST1 pin1 being MCLR?
I used connector X12 for the MCLR (the pin that's closest to R61, it's pin 6?).
In that case, both can be used

Pretty sure, since it worked