Program Data (PIC) verschiedene DeLonghi Maschinen - Diskussionsthread

[Ano]

I have a delonghi magnifica s plus ecam 22.320 sb s110132213127 - pic is: PIC18LF2520.

Does anyone have the hex file for this? or is there any other I can use?

So what is the 52... number on your pcb?
Vielleicht kann @coffeeland_bg helfen: Firmware Brauche fuer ECAM 22.320.SB

 

[LeoTimis]

So what is the 52... number on your pcb?
Vielleicht kann @coffeeland_bg helfen: Firmware Brauche fuer ECAM 22.320.SB

thanks for getting back so quick.
The number is 5213216621
I can’t find that software you’ve screenshooted for some reason. Do you know if it work on Mac? As I only have a Mac unless I ask some friends…

and you’re right mplab is a pain. Crashes constantly …

 

[Ano]

The firmware is available for PC.
With a little searching on Google you must be able to find it, there's a different version for the PicKit2 and for the PicKit3.
Forummitglied SpanierHH aus dem Kaffee-Welt Forum kann eine gebrauchte Platine mit Software 5213216621 liefern, als das noetig ist.

 

[Ano]

Here it was just uploaded: Firmware Brauche fuer ECAM 22.320.SB

 

[LeoTimis]

Yes thank you. I spoke to coffeeland as well just before and have received it.
I had some time and flashed the board and now it’s working again.
Thank you all!

 

[Szerzetes]

Meleg fogadtatás.

ECAM.22.360.B géphez keresek firmware-t.
A panelen lévő számok: 5213219831 SW1.4

Segítségüket előre is köszönöm.

Legyen szep napod.

A német nem igazán az erősségem, ezért elnézést kérek.

 

[Ano]

Just use the search function of the forum, I uploaded it some time ago.

 

[Stavi]

hali,

The S (silver) and B (Black) software are identical.
I suddenly found these, use the search field:

ECAM22.360S 5213215491-sw-1-0.zip

Program Data (PIC) verschiedene DeLonghi Maschinen - Diskussionsthread

Hast du Erfahrung mit den Saeco Maschinen? Meiner Meinung werden die vom Service Center per UART ausgelesen/programmiert ??? Lies doch mal hier Program Data (PIC) verschiedene DeLonghi Maschinen - Diskussionsthread (Post 392956) und weiter.

saeco-support-forum.de

The sw version numbers are older (but I don't think this is a problem).

üdv Tamás

üdv Tamás

 

[Ano]

Also the 5213219831 was posted.

 

[LouiSz]

Zu su sehen fuer eine ESAM000 / ESAM3200 (denken wir); Platine Nummer 5232121200; Firmware Version: SW 7.2; PIC Type: PIC18F452.

@bikermaex : du bist wirklich ein sehr guter Gewinn fuer dieses Forum!

Hi guys! I have a 5232121200 sw 7.2 problem, can someone help me what to do to work? It’s going automatically playing on and off the machine and I don’t know the problem. Can anyone have the sw for it? Thanks a lot

 

[Ano]

Can you make a dump of the Program Data of the PIC chip? If you can, it is of no use to ask for a dump here.
And if you would really need it: Forensuche ! ;-)
It has been posted already...

 

[konkitosz@gmail]

Hallo!
Vielen Dank an das Forum für die Erstellung und die Erlaubnis, hier zu sein.
Ich möchte Sie um Hilfe bitten.

Könnte mir jemand ein Programm für ECAM 25.452 hochladen?
Ich habe im Forum danach gesucht, bin aber leider nicht fündig geworden.

Vielen Dank.

Norbert

 

[Ano]

Du kannst deine eigene Platine nicht mehr auslesen?

 

[konkitosz@gmail]

"Túl finom a daráló" hibaüzenetet kapom -----> Túl finom a őrölt anyag. Fizikai jelenséggel eddig nem találkoztam, ezért a szoftverre gondoltam.
Elnézést, de még kezdő vagyok a szoftverek terén.

 

[Ano]

So the micro-processor is still working, that's good
Then please start to make a dump of the PIC (using a PicKit) and post it here. As it has not been posted here yet. Please also include some pictures of the pcb.
Thanks!

 

[konkitosz@gmail]

Ich erhalte die Fehlermeldung "Mahlwerk zu fein" -----> Mahlgut zu fein. Bisher ist mir noch kein physikalisches Phänomen begegnet, also dachte ich an die Software.
Sorry, ich bin noch ein Anfänger was Software angeht.

 

[konkitosz@gmail]

So the micro-processor is still working, that's good
Then please start to make a dump of the PIC (using a PicKit) and post it here. As it has not been posted here yet. Please also include some pictures of the pcb.
Thanks!

Ok, it is working sure. Many many thanks. Coming soon with pictures and so on.

 

[Ano]

Great! After that, we will help you with the next step ;-)

 

[Ano]

Here I am.

This is tue PCB and the MCLR with program.

I hope the machine will OK then.

Please also upload the dump here ;-)
Do you also have a picture showing the entire pcb? Thanks a lot!

 

[konkitosz@gmail]

I've been a bit out of practice in the last 15 years, sorry.