Program Data (PIC) verschiedene DeLonghi Maschinen - Diskussionsthread

[Michael 18]

Wäre doch sinnvoll?! (gewesen)
Schade

 

[Hallo_spencer]

Hat jemand eine Firmware einer ESAM z.b. 3000 ohne ECO Taste aber wo sich die Kaffeetemperatur einstellen lässt ahnlich wie die Wasserhärte?

 

[Al3xisos]

Does anyone have firmware for delonghi magnifica rapid cappuccino 3213210011 sw 22?
Thanks

 

[Al3xisos]

Does anyone have the firmware for 5213210011 sw 22?
delonghi magnifica rapid cappuccino.
thanks

 

[OlliFFM]

Does anyone have the firmware for 5213210011 sw 22?
delonghi magnifica rapid cappuccino.
thanks

ESAM 3300, only have SW20

 

[Al3xisos]

This is sn board

 

[Grischutka]

Hallo, ich brauche HEX für 5213212831 SW1.1 Delohghi ECAM 23.450. Hat jemand vieleicht?

 

[nosleep_ol]

Добрый день. Требуется прошивка табло 5213225441. Кофемашина ECAM 22.36. После скачка напряжения на этой плате вышел из строя PIC16F1938. Микроконтроллер заменен, теперь требуется прошивка. Помогите мне, пожалуйста. Заранее спасибо.

 

[Ano]

Добрый день. Требуется прошивка табло 5213225441. Кофемашина ECAM 22.36. После скачка напряжения на этой плате вышел из строя PIC16F1938. Микроконтроллер заменен, теперь требуется прошивка. Помогите мне, пожалуйста. Заранее спасибо.

Better to post in German or English...
In case you don't find it, probably 5213215511 will also work fine

 

[Ano]

Does anyone have the firmware for 5213210011 sw 22?

So why do you need it, is the PIC not accessible anymore?

 

[nosleep_ol]

Оба PIC вышли из строя. На силовой плате КЗ между Vdd и Vss и еще полопались дорожки по питанию. Силовую плату удалось найти новую, вместе с прошивкой. А вот на дисплейной плате PIC программатором не определялся, его тоже заменил, сейчас определяется, но нужна прошивка.

 

[nosleep_ol]

Good afternoon. Display firmware required 5213225441. ECAM 22.36 coffee machine. After a power surge on this board, the PIC16F1938 failed. The microcontroller has been replaced, firmware is now required. Help me please. Thanks in advance.

 

[nosleep_ol]

Лучше писать на немецком или английском...
В случае, если вы не найдете его, возможно, 5213215511 также подойдет.
[/ЦИТИРОВАТЬ]
Можете помочь с прошивкой для 5213215511? Заранее благодарен

 

[LeoTimis]

Hi Everyone!

I messed up... first time using mplab and I forgot to to a backup...

I have a delonghi magnifica s plus ecam 22.320 sb s110132213127 - pic is: PIC18LF2520.

Does anyone have the hex file for this? or is there any other I can use?

I have tried PIC18LF2520_ECAM23_210_SW1_1_DelonghiCode5213212201 it turns on however, I can't get past "confirm hot water" screen. no button works.

I have also tried PIC18LF2520_ECAM23_210_SW1_1_DelonghiCode5213212201 as in pictures looks the same however, it doesn't work either...

Thank you so much!

 

[Ano]

You'd better stay away form MPLAB and use the 'simple' PicKit software, this software:

 

[Ano]

I have a delonghi magnifica s plus ecam 22.320 sb s110132213127 - pic is: PIC18LF2520.

Does anyone have the hex file for this? or is there any other I can use?

So what is the 52... number on your pcb?
Vielleicht kann @coffeeland_bg helfen: Firmware Brauche fuer ECAM 22.320.SB

 

[LeoTimis]

So what is the 52... number on your pcb?
Vielleicht kann @coffeeland_bg helfen: Firmware Brauche fuer ECAM 22.320.SB

thanks for getting back so quick.
The number is 5213216621
I can’t find that software you’ve screenshooted for some reason. Do you know if it work on Mac? As I only have a Mac unless I ask some friends…

and you’re right mplab is a pain. Crashes constantly …

 

[Ano]

The firmware is available for PC.
With a little searching on Google you must be able to find it, there's a different version for the PicKit2 and for the PicKit3.
Forummitglied SpanierHH aus dem Kaffee-Welt Forum kann eine gebrauchte Platine mit Software 5213216621 liefern, als das noetig ist.

 

[Ano]

Here it was just uploaded: Firmware Brauche fuer ECAM 22.320.SB

 

[LeoTimis]

Yes thank you. I spoke to coffeeland as well just before and have received it.
I had some time and flashed the board and now it’s working again.
Thank you all!