Program Data (PIC) verschiedene DeLonghi Maschinen - Diskussionsthread

[Ano]

So there could still be an obstruction in the heating element or in the 'upper brewing unit' (don't know the name in English, but I mean part number 5513227961).

 

[Ano]

Bitte hier im Bereich

Dateiensammlung für De Longhi Firmware diverse Typen - Program Data (PIC)​

keine Reparaturen
Bitte neues Thema aufmachen

Maybe an admin can move these posts?

 

[Matrr]

HI all .. i need a dump firmware for primadona s evo model ecam 510.55m 5213220741-06 SW 01.0.000
or equivalent

 

[Ano]

HI all .. i need a dump firmware for primadona s evo model ecam 510.55m 5213220741-06 SW 01.0.000
or equivalent

Are you still able to make a dump of the PIC of your own machine?

 

[Matrr]

Are you still able to make a dump of the PIC of your own machine?

no, the processor is short

 

[Ano]

Sorry, I don't have this firmware.

 

[daniel9202]

Hey Guys,please help me!

I was a bit lazy to read back in time in the forum,but! We experiencing problems with Delonghi machines,as the grinding time too short. it means doesen matter how you set the grinder,it just works too short,so it means shit coffee at the end. We thinks its a firmware or software problem,thats why i have turned to you,if so, can you help me with the right firmware and also,how to set it up,and what kind of cable do i needed to the PCB? we are talking about a ECAM 3000B type of machine, Thamls and BR

 

[Ano]

I was a bit lazy to read back in time in the forum

And I'm a bit lazy to help people that don't do an effort themselves ;-)

 

[OlliFFM]

Hey Guys,please help me!

I was a bit lazy to read back in time in the forum,but! We experiencing problems with Delonghi machines,as the grinding time too short. it means doesen matter how you set the grinder,it just works too short,so it means shit coffee at the end. We thinks its a firmware or software problem,thats why i have turned to you,if so, can you help me with the right firmware and also,how to set it up,and what kind of cable do i needed to the PCB? we are talking about a ECAM 3000B type of machine, Thamls and BR

Check Hall Sensor

 

[daniel9202]

And I'm a bit lazy to help people that don't do an effort themselves ;-)

Fair enough! TBH theres a lot going on here,and im kinda out of time,so if you can help it would be much appreciatied,or help me where the problem is,so far im at the point that i downloaded one of the modified software and get the programm called Hex,or Dex, cant remember excactly! Anyway,thank you if you are able to help me!

 

[daniel9202]

Check Hall Sensor

Will do! Thanks a lot!!

 

[daniel9202]

Okay,so i digged in a little bit,i need a PIC programmer. as much i seen the pickit is the most common for everyone. And then i can download the modified firmware and give a go! Do you guys recommened the pickit? or shall i buy something else?! Thanks a lot! Best Regards

 

[OlliFFM]

Okay,so i digged in a little bit,i need a PIC programmer. as much i seen the pickit is the most common for everyone. And then i can download the modified firmware and give a go! Do you guys recommened the pickit? or shall i buy something else?! Thanks a lot! Best Regards

I don't see any need to modify Firmware. It's a known issue, Hall Sensor or nut on the drive spindle.

 

[Ano]

I don't see any need to modify Firmware.

He probably means erasing the EEPROM data of the PIC.

Do you guys recommened the pickit?

Yes, the PiCkit2 is just fine for this.

 

[daniel9202]

He probably means erasing the EEPROM data of the PIC.

Yes, the PiCkit2 is just fine for this.

Thank you!

 

[efendel]

Ich habe etwa 30 Datensätze von den Pic Prozesoren samt Inhalt, rom und Epprom! Für den Pick it 3!
Kann angefragt werden!

 

[daniel9202]

Hey guys,sorry again,we kinda stuck in this point. We have start solder the wires,as we seen on old pics.But the colour code was different on the wires on the older versions of the pickit. Can you please help me,if we want to solder the wires which color is the row? Start from the red wire on the cable. So that red is the earth cable,i think the first red goes on it. And then?

Or it does matter which colour goes on each end? As i seen the 2. goes to the processor and all the rest goes to pump etc.

Thanks again for the help!!!!
Dan

 

[Palatino-User]

Vielleicht hilft das weiter.

 

[martinero]

No, myslím, že najjednoduchší spôsob je kúpiť si túto LP platňu od BND a urobiť DUMP.
Potom by sa problém vyriešil do budúcnosti.
ETAM 29.620 je zjavne vzácny a ani ja nemám zodpovedajúci DUMP.

 

[Palatino-User]

Oh, Mist, gerade gesehen das ich den obigen Dump im falschen Thread gepostet habe. Sorry.
@uhrmacher oder @Grisu bitte einmal verschieben. Danke.